If you own a 2007-2021 Toyota Tundra or a 2008-2021 Toyota Sequoia, you have likely noticed the “nose-down” factory stance, also known as rake. While designed for aerodynamics and hauling, many owners prefer a more aggressive, balanced look. The 2″ Front Leveling Lift Kit is the most popular modification to eliminate this rake, allowing for larger tires and a commanding presence on the road.
Product Features
This leveling kit is engineered to provide a 2-inch lift to the front of your vehicle without compromising the factory ride quality. Unlike complex suspension lifts, this kit uses high-precision strut spacers.
- Precision Engineering: CNC-machined from aircraft-grade 6061-T6 aluminum or high-density carbon steel with a 10.9-grade bolt set.
- Corrosion Resistance: Finished with a durable powder coating or anodized layer to withstand harsh off-road environments and road salt.
- Larger Tire Clearance: Provides the necessary gap to fit up to 33-inch tires comfortably without rubbing.
- Retains Factory Ride: Designed to work with your original OEM struts and springs, maintaining the comfort Toyota is known for.
Technical Specifications
- Compatibility: 2007-2021 Toyota Tundra (2WD/4WD); 2008-2021 Toyota Sequoia (2WD/4WD).
- Lift Height: 2 Inches (Front).
- Spacer Thickness: Please note, the spacer thickness is not 2 inches; the ratio between lift height and spacer thickness is approximately 1:2 due to suspension geometry.
- Material: Billet Aluminum or Heavy-Duty Steel.
- Installation Time: Approximately 1.5 to 3 hours.
Pros and Cons
| Pros | Cons |
| Aesthetics: Instantly levels the vehicle for a rugged, “straight” look. | Headlight Adjustment: Raising the front may require you to re-aim your headlights lower. |
| Affordability: Significantly cheaper than full suspension lift kits. | Alignment Required: A professional alignment is mandatory after installation. |
| Ground Clearance: Increases approach angles, making it better for light off-roading. | Nose High under Load: If you tow very heavy loads, the rear may sit lower than the front. |
Installation Guide: Step-by-Step
- Preparation: Jack up the front of the vehicle and secure it on jack stands. Remove the front wheels.
- Disassembly: Disconnect the sway bar end links and remove the upper ball joint nut to allow the control arm to drop.
- Strut Removal: Remove the three nuts at the top of the strut tower and the large bolt at the bottom of the strut.
- Spacer Attachment: Place the 2″ leveling spacer on top of the strut assembly and secure it using the provided hardware.
- Reassembly: Reinstall the strut assembly into the vehicle. Reconnect the ball joints and sway bar links.
- Final Check: Torque all bolts to factory specifications.
- Crucial Step: Take the vehicle to an alignment shop immediately. Installing a lift kit changes the toe and camber settings.
Why Choose This 2″ Leveling Kit?
The 2007-2021 Tundra and Sequoia are built on a robust platform that handles modifications exceptionally well. A 2-inch lift is the “sweet spot”—it is high enough to notice a significant visual change and clear bigger tires, but low enough that it doesn’t put excessive strain on your CV axles or ball joints. It is the perfect entry-level modification for any Toyota truck enthusiast.